The design of this centrifuge is based on the technology of our CONTURBEX screen scroll centrifuge, with the addition of a pre-thickening stage. The aim is high separating efficiency, even with slightly-concentrated suspensions, and a high yield of fine contents.
The main task to be performed by this centrifuge is the separation of solid matter and liquids from suspensions. The suspension is fed into the pre-thickening stage of the centrifuge through an inlet pipe and apertures in the middle of the scroll body.
The main liquid content is drained off through an adjustable weir at the back of the solid bowl to obtain a clear filtrate.
The solid matter is pre-thickened and conveyed by the worm to the screening section, where residual dewatering and product washing takes place (if necessary). The liquid streams from the solid bowl and screening section are individually or jointly drained off by means of a single- or dual-cyclone separator.
The loss of solid material is relatively low and can be further reduced by returning the screening filtrate to the feed. The solid matter is conveyed by the scroll to the solids discharge housing via the cylindrical screening section.
The centrifuge is fitted with a special profile slotted screen cloth. Depending on the application, a special screen plate can alternatively be used. In all cases the screening elements can be very easily exchanged, without having to disassemble the machine or the rotating parts.